Back to FIBERGLASS TANKS
SECTIONAL TRICKLE
All A Trickle Tank consists of a single chamber, and is based on the simple principle of displacement. An amount of effluent is discharged to the field equal in volume to the sewage entering the tank. No sewage pump is required, as this is a gravity flow system.
Related products
G-2000-2
G-2000-2 GUARDIAN 1-PIECE FIBERGLASS TANKS – 2000 GALLON (9090 LITRES)
SHALLOW BURIAL TANKS – To maximum 2 foot (609 mm) overburden DEEP BURIAL TANKS – To maximum 7 foot (2134 mm) overburden EXTRA DEEP BURIAL TANKS are available as a special order Specify burial depth when ordering PUMP-OUT TANK – Pump chamber – 2 sizes availableG-2000-6
6 FOOT DIAMETER BURIAL TANKS
All Equinox 6 foot diameter tanks are one piece construction. Each tank comes complete with a 2 foot, 24″ (610 mm) diameter bonded access sleeve, a 4″ ABS inlet fitting, an 8″ pump-out access cover, and steel lift lugs. Compartment dividers are available at an additional cost.
FIBERGLASS CRIBBING
HEAVY DUTY WATER WELL CRIBBING
- Cribbing and sleeves are filament wound for optimum strength.
- Cribbing is equipped with bell and spigot connections.
- All bottoms are structurally reinforced.
- Bonding of bottoms is extra. Contact the factory for pricing.
- Reinforcing Ribs @ 30” on center.
FIBERGLASS LOW PROFILE
Low Profile Sewage Holding Tanks
The LPT-1000 is a rugged fiberglass tank ideally suited for all areas where deep burial is not practical This tank has the structural advantages of fiberglass construction, plus excellent resistance to weathering and corrosion. With a working capacity of 1000 Imp. Gals. (4545L) and a height of only 33” (840), the tank is designed to slide under cottages and homes. The LPT-1000B is recommended for burial up to 2’ (610). An optional, factory installed 4” (101) pump-out suction line is available. Large flat areas accommodate bulkhead fittings up to 3” (76) dia. or couplings up to 4” (101).