Placeholder
SECTIONAL WATER STORAGE
All Equinox Buriable Water Storage Tanks are manufactured from fiberglass on the same modular principle as the underground septic and holding tanks. Water storage tanks have a 1¼” (32) FIP bulkhead outlet fitting, 3” (76) ABS fill fitting, and 1½” (38) solvent weld fitting. These tanks are suitable for burial to a depth of up to 2’ (610). Recommended installation involves burying the tank with a 3” (76) layer of insulating styrofoam placed 6” (152) above the tank. Tanks buriable to a depth of 7’ (2135) are available. Contact factory for details.
ADD TO QUOTE
Placeholder
SECTIONAL SIPHON
All A Siphon Tank consists of two chambers separated by an internal divider, with a built in siphon through which effluent is discharged. No sewage pump is necessary, as the siphon works on a gravity flow basis. After initial priming, the siphon regulates the amount of effluent distributed to the field upon each discharge. This allows for even dispersal of effluent throughout the field in sufficient quantities to prevent freezing of the system.
ADD TO QUOTE
Placeholder
SECTIONAL TRICKLE
All A Trickle Tank consists of a single chamber, and is based on the simple principle of displacement. An amount of effluent is discharged to the field equal in volume to the sewage entering the tank. No sewage pump is required, as this is a gravity flow system.
ADD TO QUOTE
Placeholder
SECTIONAL HOLDING TANKS
All A Holding Tank is a single chamber tank without an outlet. Accumulated sewage must be “pumped out” at regular intervals and transported elsewhere for disposal. Tanks come with a child-proof lid, complete with an 8″ (203 mm) plastic lid.
ADD TO QUOTE
Placeholder
LPT-1000-B

LPT-1000 LOW PROFILE SEWAGE HOLDING TANK

All The LPT-1000 is a rugged fiberglass tank ideally suited for all areas where deep burial is not practical This tank has the structural advantages of fiberglass construction, plus excellent resistance to weathering and corrosion. With a working capacity of 1000 Imp. Gals. (4545L) and a height of only 33” (840), the tank is designed to slide under cottages and homes. The LPT-1000B is recommended for burial up to 2’ (610). An optional, factory installed 4” (101) pump-out suction line is available. Large flat areas accommodate bulkhead fittings up to 3” (76) dia. or couplings up to 4” (101).
ADD TO QUOTE
Placeholder
SECTIONAL 2 AND 3 COMPARTMENT TANKS
All Equinox manufactures a line of tanks for use with 2 or 3 compartments. These tanks are rated by retention capacity and meet standards outlined some regulating bodies. Some regional regulations require certain minimum retention capacities, which vary with the number of bedrooms per home. Confirm with your local regulatory authority. All 2 and 3 compartment septic tanks have the working chamber divided in two by an extra divider. The following tanks are all CSA Certified and come complete with a 4” (101) ABS solvent weld coupling, street elbow, and 8” (202) of 4” (101) ABS pipe. Holding tanks come with a 4” (101) ABS solvent weld coupling, complete with suction pump-out fittings. All 2 and 3 compartment septic tanks are manufactured to accept an effluent filter as required.
ADD TO QUOTE
Placeholder
G-PTS-700

GUARDIAN SEAMLESS FIBERGLASS BALL TANKS (740 GALLON – 72″ DIAMETER)

All SHALLOW BURIAL TANKS – To maximum 2 foot (609 mm) overburden DEEP BURIAL TANKS – To maximum 7 foot (2134 mm) overburden EXTRA DEEP BURIAL TANKS are available as a special order Specify burial depth when ordering
ADD TO QUOTE
Placeholder
LPT-1000-A

LPT-1000 LOW PROFILE SEWAGE HOLDING TANK

All The LPT-1000 is a rugged fiberglass tank ideally suited for all areas where deep burial is not practical This tank has the structural advantages of fiberglass construction, plus excellent resistance to weathering and corrosion. With a working capacity of 1000 Imp. Gals. (4545L) and a height of only 33” (840), the tank is designed to slide under cottages and homes. The LPT-1000B is recommended for burial up to 2’ (610). An optional, factory installed 4” (101) pump-out suction line is available. Large flat areas accommodate bulkhead fittings up to 3” (76) dia. or couplings up to 4” (101).
ADD TO QUOTE
Placeholder
G-800-2

G-800-2 GUARDIAN 1-PIECE FIBERGLASS TANKS – 800 GALLON (3640 LITRES)

All SHALLOW BURIAL TANKS – To maximum 2 foot (609 mm) overburden DEEP BURIAL TANKS – To maximum 7 foot (2134 mm) overburden EXTRA DEEP BURIAL TANKS are available as a special order Specify burial depth when ordering PUMP-OUT TANK – Pump chamber – 2 sizes available
ADD TO QUOTE
Placeholder
G-PTS-1000

GUARDIAN SEAMLESS FIBERGLASS BALL TANKS (1000 GALLON – 84″ DIAMETE)

All SHALLOW BURIAL TANKS – To maximum 2 foot (609 mm) overburden DEEP BURIAL TANKS – To maximum 7 foot (2134 mm) overburden EXTRA DEEP BURIAL TANKS are available as a special order Specify burial depth when ordering

ADD TO QUOTE
Placeholder
G-800-2

G-800-2 GUARDIAN 1-PIECE FIBERGLASS TANKS – 800 GALLON (3640 LITRES)

All SHALLOW BURIAL TANKS – To maximum 2 foot (609 mm) overburden DEEP BURIAL TANKS – To maximum 7 foot (2134 mm) overburden EXTRA DEEP BURIAL TANKS are available as a special order Specify burial depth when ordering PUMP-OUT TANK – Pump chamber – 2 sizes available
ADD TO QUOTE
Placeholder
G-8000-8

8 FOOT DIAMETER COMMERCIAL BURIAL TANKS

All Equinox 8’ diameter (2440) tanks provide large volume capacities. All are buriable to 7’ depth (2135) from the top of the tank, and are provided with lifting lugs. Holding, Trickle, and Pump-Out tanks are provided with 4″ (100) ABS pipe inlets. For water storage tanks, specify sizes of vents, fill and outlet openings. All tanks come complete with a 24″ (610 mm) diameter lid and 1 foot (305 mm) bonded sleeve. A 24″ (610 mm) diameter sleeve is available to a maximum length of 7’ (2135 mm), at an additional cost. Tanks that require separate chambers are available (with an additional cost for internal dividers). Tanks are also available for special applications.
ADD TO QUOTE